Clarion VX401 Owner's Manual & Installation Manual page 19

G'!I1·}f";J:
Settings :8
Ejt>-.:t 6:"<:1<
\!·df';)
Au11(o
R.llln'_l
1 2 3 OK
A0~11(l11rl!
Oth(,>fS
4 5 6
C!,';II
MOl1tlor
7 8
9 0 ~.1"lIl
A(l"u:;.t
1 0 UO A'\.1
Adjusting the clock
1. Touch the [Settings] key. The Settings
menu will be displayed.
2. Touch the [Clock] key in General sub
menu.
3. Set up the time by touching the digital
numbers on the screen. After inputting the
time, you can choose AM or PM if the Clock
Mode is set to 12 Hr.
Basic Op_e_ra_t_io_n_s _
Adjusting the EQ
The Bass gain and Bass frequency can
be adjusted as follows.
1. Touch [ - ] or [
+ ]
key to set the
desirable level.
2. To set the Bass center frequency, enter
the Audio adjustment in the Settings
menu.
3. To set the Bass Q-Factor, enter the Audio
Adjustment in the Settings menu.
The EQ can be adjusted as follows.
1. Touch the [... ] or [~] key to select your
settings.
2. To set your preferable setting, select User.
3. Select from preset setting list:
Flat, Jazz, Pop or Classical.
Adjusting the Bass
Adjusting the Treble
4. Touch the [Clock Mode] to change time
settings to 12Hr or 24Hr.
The Treble gain and Treble frequency can
be adjusted as follows.
1. Touch [ - ] or [
+ ]
key to set the desirable
level.
2. To set the Treble center frequency, enter
the Audio adjustment in the Settings menu.
Adjusting the Balance/Fader
The Balance or Fader can be adjusted as
follows.
1. Touch the [R] or [F) key to adjust to the
fader level.
• The factory default setting is "0".
(Adjustment range: front 9 to rear -9)
2. Touch the [Left] or [Right] key to adjust to
the balance level.
• The factory default setting is "0".
(Adjustment range: left -9 to right 9).
Reset
to
Factory Defaults
1. Touch the [Settings] key. The Settings
menu will be displayed.
2. Touch the [Others] key.
3.
Touch the [Reset] key.
Select [YES] to restore your unit to factory
default settings. This function will erase all
memory from the unit and you must reset all
personalized items such as tuner presets.
NOTE:
• You will be asked once to confirm if you want
to use the default setting. The unit will close
the panel automatically.
Adjusting the Subwoofer
The Subwoofer can be adjusted as follows.
1. Touch the [ - ] or [
+ ]
key to adjust to
the subwoofer level.
• The factory default setting is "0".
(Adjustment range: left -9 to right 9).
Adjusting the Loudness
The Loudness can be adjusted as follows.
1. Touch the [... ] or [
~]
key to turn loudness
On or Off.
VX401NZ401
19