Brinkmann Ranger Assembly And Operation Instructions Manual page 26

step 10
To install the side burner, remove
the pre-attached wing nut and
washer on the side burner
and install the side burner as
illustrated .
step 11
Position burner venturi over side
burner valve nozzle as illustrated .
step 12
Insert M4 X 10 mm bolt through
hole of side burner, then use
M4 washer and M4 nut to secure
under side table as illustrated .
step 13
Re-attach washer and wing nut
under side table to secure side
burner as illustrated .
25
Side
Burner
Valve
Nozzle
Burner Venturi
M4 Washer
M4 X 10 mm Bolt
M4 Nut
Washer
Wing Nut