Table of Contents
Advertisement
Cantatis
Overture 192 Windows Vista User Guide
Then double-click on the Cantatis Overture 192 Audio Controller device to display the properties
panel, then select the Advanced tab and check that the Default Format is set to the same sample
rate as the Overture 192 Control Application:
Then click on "OK" to close the properties panel then on "OK" to close the Windows Vista Sound
panel.
Go back to the "Levels" panel in the Overture 192 Control Application and use the test buttons to
make sure that you have resolved the problem.
4.5.3 Control Panel
The "Control" panel allows you to control some of the features of the Overture 192.
© Cantatis, 2009
Page 29 of 35
Advertisement
Table of Contents
