Overture 192 Control Application; Fundamentals; Starting Up - Cantatis Ultimate Audio Overture 192 User Manual

Cantatis Overture 192 Windows Vista User Guide
The sample rate is set using the drop down menu for the Default Format and then you should
click on "OK" or "Apply" to set the sample rate you have selected.
Tip: You must always make sure that the sample rate set in the Windows Vista Sound
panel is exactly the same as the sample rate that is set in the Overture 192 Control
Application or you may find that you can't hear any sound. Don't worry though; the
Overture 192 Control Application will help you to do this at the appropriate time.

4 Overture 192 Control Application

4.1 Fundamentals

When we designed the Overture 192 Audio Output Interface one of the fundamental objectives
was to keep it simple to install and simple to use.
So, no bundles of cables hanging out of the back of your computer and no complicated control
applications with volume controls, graphic equalisers and dynamic effects that can all be
achieved by using the operating system and applications on your computer anyway.
Instead, the Overture 192 Control Application simply focuses on the essentials.

4.2 Starting Up

After you have logged onto your PC you will find a shortcut to the Overture 192 Control
Application on your desktop, which you can double click to start the application:
Tip: If you don't want the Overture 192 shortcut on your desktop then it is safe to delete it.
© Cantatis, 2009 Page 18 of 35