Table of Contents
Advertisement
Cantatis
Overture 192 Windows Vista User Guide
Tip: If you are using the digital outputs of the Overture 192 then you might want to set the
"Selected sample rate" to the maximum sample rate supported by your digital receiver (typically
48kHz or 96kHz). This will ensure that you always play at a sample rate that your digital receiver
will understand and you will never end up in the situation where you are playing audio that your
digital receiver will not be able to play.
4.5.2 Levels Panel
The "Levels" panel allows you to view the audio levels playing out of the left and right channels of
the Overture 192 Audio Interface.
When you are setting up your system you can also click on the "Test left" button to play a test
tone on the left channel:
The button text will change to "Stop left" and if you click on the button again then the test tone will
stop playing.
© Cantatis, 2009
Page 26 of 35
Advertisement
Table of Contents
