Appendix; Icons, Tones & Indicator Lights; In Case Of Difficulty - AT&T 1855 User Manual

Speakerphone/ answering system with caller id & call waiting
Hide thumbs Also See for 1855:
Table of Contents

Advertisement

ATT-1855CIB-d04.qxd
3/19/05
5:09 PM

Appendix

Icons, tones & indicator lights
Status icons
ERR
NEW
REP
1
CL
MSG#
No:
NEW
REP
No.
ERR
MSG#
CL
Alert tones
"Beep"
(1 quick beep)
"Beep-Beep-Beep-Beep-Beep"
(5 quick beeps)
"Beep-Beep-Beep"
(3 quick beeps, repeated)
Indicator lights
Page 26
Ringer is off (see page 8).
New call received (see page 14).
Repeat call from same number (see page 14).
Call number (see page 14).
Error (current operation has been unsuccessful; try again).
Message number (see page 17).
If flashing, set answering system clock (see page 18).
Confirmation tone (procedure completed).
Error tone (current operation has been
unsuccessful; try again).
Priority call alert (caller has entered
priority call code; see page 21).
NEW CALL
On when new call(s) received since
Caller ID log last reviewed.
ANSWERING SYSTEM
On: Answering system is on.
Off: Answering system is off.
Flashing: New message(s) received
MUTE
On when microphone is muted.
SPEAKER
On when speakerphone is in use.
26
Appendix

In case of difficulty

If you have difficulty with your phone, please try the suggestions below. For Customer
Service, visit our web site at www.telephones.att.com, or call 1 800 222–3111.
Telephone does
• Make sure the AC adapter is plugged into an outlet not controlled by
not work at all
a wall switch.
• Make sure the line cord is plugged firmly into the telephone and the
modular jack (see page 5).
Telephone does
• Make sure the ringer is on (see page 8).
not ring
• Make sure the telephone line cord and AC adapter are plugged in
properly (see page 5).
• You might have too many extension phones on your telephone line to
allow all of them to ring. Try unplugging some of them.
If you hear
• Appliances plugged into the same circuit as the telephone can cause
noise or
interference. Try moving the appliance or telephone to another outlet.
interference
• Disconnect the telephone from the modular jack and connect another
during a call
telephone. If calls are still not clear, the problem is probably in your
wiring or local service. Call your local telephone service company.
27

Advertisement

Table of Contents
loading

Table of Contents