Sharp DK-A10 User Manual page 25

• Memorizing a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
1
Perform steps 1 - 3 in "Tuning" on page 24.
2
Press the MEMORY button to enter the preset tuning
saving mode.
3 Within 1 minute, press the ~ or ~ button to select the
preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 1 minute, press the MEMORY button to store that
station in memory.
If the preset number indicators disappear before the station is
memorized, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a
preset station.
When a new station is stored in memory, the station previously
memorized for that preset channel number will be erased.
Note:
The backup function protects the memorized stations for a few hours
should there be a power failure or the AC power cord becomes
disconnected.
• To recall a memorized station
Press the
~
or
~
button for less than 0.5 seconds to select the
desired station.
• To scan the preset stations
The stations saved in memory can be scanned automatically.
(Preset memory scan)
1 Press the
~
or
~
button for more than 0.5 seconds.
The preset number will flcfsh and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2 Press the
~
or
~
button again when the desired
station is located.
'oes§
~~m
88
(§)08§
0':"080
8
EMORY
- - 8
SHARP
~
• To erase entire preset memory
1 Press and hold the CLEAR button for more than 3 seconds.
"TUN CLEAR" will be displayed.
2 Within 10 seconds, press the MEMORY button.
"COMPLETE" will be displayed.
DK-A10
DK-A10BK
25