Sharp DK-A10H Quick Start Manual

MODEL
DK-A10H
DK-A10H(BK)
MUSIC SYSTEM FOR iPod
This quick Start Guide will help you to correctly install and
operate your system.
Illustration printed in this quick guide are for the model DK-A10H.
Accessories
Remote control x 1 AM loop aerial x 1
AC power lead x 1
Turn on your system
The first time the unit is plugged in, the unit will enter the
demonstration mode.
1
Press the ON/STAND-BY button to turn the power on.

System connections

FM aerial
TV
To video
input socket
DK-A10H QG
®
FM aerial x 1
iPod adaptor x 8
AM loop aerial
Video Cable
(not supplied)
1
Before using remote control
Before using remote control, please remove plastic shield at
battery holder.
Remote controller

Remote control battery installation

Use the "CR 2025", coin lithium battery.
1
Whilst pushing the locking tab towards the centre of the
remote control, slide out the battery holder.
Back of remote control
2
Remove the old battery from the battery holder, insert the
new battery and then slide the battery holder back into the
remote control.
Battery holder
Polarity (+) symbol
Locking tab
Battery type
To AC input
3/8/07, 3:44 PM
Plastic shield
Battery holder
Locking tab
Positive (+) side up
Wall socket
(AC 220 - 240 V, 50 Hz)
TINSEA172AWZZ
07C R KI 1