Part Identification Chart - NordicTrack NTEL09811.2 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M6 Washer
(90)–10
Washer (97)–10
M8 Jam Nut
(102)–6
M10 Split Washer
M8 x 22mm
M4 x 16mm
M4 x 12mm
Screw (101)–10
Screw (148)–4
M8 x 43mm
Button Bolt (96)–6
M10 x 25mm
(105)–20
Washer (134)–2
M6 x 16mm
Screw (103)–10
M10 x 20mm
Screw (91)–22
5
16mm Wave
Washer (54)–2
M8 x 23mm Button
Screw (82)–10