Upper Threading - Singer HA-1 Instruction Manual

UPPER THREADING

1– Place a spool of thread on spool pin (A).
2– Bring the thread from the back of the spool, (so that the notch
in the spool is up) and lead it through thread guide (B).
3- Run the thread down, between, and under the tension disks (C)
from back to front.
4– Bring the thread over the guide bar (D) and through the check
spring (E).
5- With the take up lever (F) in its uppermost position, bring the
thread through it from back to front.
6– Run the thread through guides (G) & (H).
7– Thread the needle from left to right, drawing it through about
4-5 inches.
-7-