Periodic Service Schedule; Hardware; General Operation - Cushman YEAR 2012 Owner's Manual

Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.

PERIODIC SERVICE SCHEDULE



Check Clean, Adjust, etc.
To perform service that is listed in this schedule but not described in this manual, contact a local Service Representative or see
the Repair and Service Manual for this vehicle.
NOTE: Some maintenance items must be serviced more frequently on vehicles used under severe driving conditions
DAILY
WEEKLY
TIRES
WHEELS
COOLING FAN
ENGINE OIL
STARTER/GENERATOR BELT
MONTHLY - 20 HOURS
WIRING
ACCELERATOR
SERVICE BRAKE
(MECHANICAL BRAKES)
PARK BRAKE
CHOKE CABLE
CARBURETOR LINKAGE
DIRECTION SELECTOR
ENGINE
COOLING FAN
STEERING ASSEMBLY
TIE ROD/LINKAGES
REAR AXLE
QUARTERLY - 60 HOURS
FRONT AXLE
FRONT SHOCK ABSORBERS
FRONT SPRINGS
FRONT WHEEL ALIGNMENT
PARK BRAKE
REAR SHOCK ABSORBERS
ENGINE ELECTRICAL SYSTEM

Replace
BEFORE USE:

Check service brake general operation

Check park brake operation - does it hold on a hill.

Check warning device function in reverse

Check tire pressure, condition of tires & rims.

Check smooth operation of accelerator.

Check for loose or missing hardware.

Check Battery - state of charge, condition, loose terminals, corrosion, hold down &

hardware


Check overall vehicle condition
(includes items listed in previous table & the following)

Examine for cuts, excessive wear and pressure (See GENERAL SPECIFICA-
TIONS)

Check for bent rims, missing or loose lug nuts

Check for build-up of foreign matter inside blower housing and fins, clean if required

Check and add if required - DO NOT OVERFILL

Check for tension, wear, cracks
(includes items listed in previous table & the following)

Check all wiring for loose connections and broken/missing insulation

Check for smooth movement - DO NOT LUBRICATE CABLE

Conduct brake performance test

Check brake performance and adjust if required

Check for smooth movement and adjustment - DO NOT LUBRICATE CABLE

Check attachment, adjust as required

Check attachment, adjust as required

Check for unusual noise, vibration, acceleration, oil leaks

Check for build-up of foreign matter inside blower housing and fins, clean if required

Check for abnormal play, tightness of all hardware

Check for excessive play, bent components or loose connections

Check for leakage, add SAE 30 oil as required
(includes items listed in previous tables & the following)

Check for damage to axle and loose or missing hardware

Check for oil leakage and loose fasteners

Check for loose hardware, cracks at attachments

Check for unusual tire wear, align if required

Check for bent/binding linkage rod

Check for damage or wear to latch arm or catch bracket

Lubricate as required, use light oil. DO NOT LUBRICATE CABLES OR BRAKE
LATCH

Check for oil leakage, loose mounting hardware

Check coil/spark plug wires for cracks/loose connections
Periodic Service Schedule
MAINTENANCE
5
5 - 25