Lubrication - Cushman YEAR 2012 Owner's Manual

Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.

LUBRICATION

Do not use more than three (3) pumps of grease in any grease fitting at any one time. Excess grease may cause
grease seals to fail or grease migration into areas that could damage components.
Putting more than three pumps of grease in a grease fitting could damage grease seals and cause premature bearing
failure.
SPARK PLUGS
Tool List
Spark plug socket, 13/16", 1/2" drive ......................................................................................................................1
Ratchet, 1/2" drive...................................................................................................................................................1
Plug gauge, wire type .............................................................................................................................................1
Anti-seize compound ...........................................................................................................................................AR
Torque wrench, 1/2" drive, ft. lbs. ............................................................................................................................1
Use care not to over-tighten the plug. Over-tightening can cause damage to the aluminum cylinder head threads.
Remove and inspect the spark plug at intervals indicated in the Periodic Service Schedule. Spark plug should be
properly gapped. Tighten to 16 ft. lbs. (22 Nm) torque
Remove and inspect the spark plug at intervals indicated in the Periodic Service Schedule. Spark plug should be
properly gapped. Tighten to 16 ft. lbs. (22 Nm) torque.
Lubrication Points
Rack
Ball
Joint
View from Underside of Vehicle
MAINTENANCE
5
Qty.
5 - 23