Table of Contents
Advertisement
Lubrication
Lubrication Schedule
Lubrication schedule
12/12 Every year
1/52 Every week
1/365 Every day
General
Remove the ignition key to prevent unintentional movements during lubrication.
When lubricating with an oil can, it skould be filled with engine oil.
When lubricating with grease, unless otherwise stated, with a high grade molybdenum disulfide grease or
another chassis or ball bearing grease offering good corrosion protection should be used.
For daily use, the machine should be lubricated twice weekly.
Wipe away excess grease after lubrication.
It is important to avoid getting lubricant on the belts or the drive surfaces on the belt pulleys. Should this
happen, attempt to clean them with spirits. If the belt continues to slip after cleaning with spirits, it must be
replaced. Gasoline or other petroleum products must not be used to clean belts.
LUBRICATION
Lubricate with grease gun
Oil change
Filter change
8011-675
Lubricate with oil can
Level check
49
English-
Advertisement
Table of Contents
