Table of Contents
Advertisement
No messages
No PTT call
No signal.
Call ended.
Not available
at this time
Number
already saved
Out of range
OR no power
at base
** Paging **
Paging all
devices
There are no
messages in the
answering system.
The incoming PTT
function is turned
off. The handset
will not receive PTT
calls.
The phone lost
connection with
the telephone base
or did not have
a strong enough
signal and the
phone call ended.
Someone else is
already using the
directory or caller
ID log.
When a handset
tries to access the
answering system
or Bluetooth menu
during battery
backup mode.
The telephone
number you have
entered is already
in the directory.
The telephone
base has lost
power, or the
handset is out
of range.
The cordless
handset is paged
by the telephone
base.
The telephone
base is paging all
devices.
Place in
charger
PTT From
HANDSET X
To devices:
X
PTT From
HANDSET X
To devices:
X
PTT To
HANDSET X
PTT To
BASE
0
Push to talk
Ended
Quiet mode on
Quiet mode is
off
Rec mem full
Rec mem low
Registering...
Please wait
Registeration
slots are
full
59
The battery is very
low. The handset
should be charged.
One handset has
started a PTT
session to another
handset and
telephone base.
One handset has
started a PTT
session to another
handset.
You have started
the PTT process
with a handset.
You have
started the PTT
process with
the telephone
base.
The PTT session is
ended.
QUIET mode is on.
QUIET mode is
turned off.
The system
recording time is
full.
The system
recording time is
low.
The handset is
registering to the
telephone base.
The telephone
base has the
maximum of
12 handsets
registered to it.
Advertisement
Table of Contents
