D-Link xStack DES-3528 Series Cli Reference Manual page 95

xStack® DES-3528/DES-3552 Series Layer 2 Managed Stackable Fast Ethernet Switch CLI Reference Guide
Hello Time
Forward Delay
Max Hops
TX Hold Count
Forwarding BPDU
NNI BPDU Address
DES-3528:admin#
Status 2 : STP enabled for RSTP
DES-3528:admin# show stp
Command: show stp
STP Bridge Global Settings
---------------------------
STP Status
STP Version
Max Age
Hello Time
Forward Delay
Max Hops
TX Hold Count
Forwarding BPDU
NNI BPDU Address
DES-3528:admin#
Status 3 : STP enabled for MSTP
DES-3528:admin# show stp
Command: show stp
STP Bridge Global Settings
---------------------------
STP Status
STP Version
Max Age
Forward Delay
Max Hops
TX Hold Count
Forwarding BPDU
NNI BPDU Address
DES-3528:admin#
show stp ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To show STP ports information for port 1 (STP enabled on Switch):
: 2
: 15
: 20
: 6
: Disabled
: dot1ad
: Enabled
: RSTP
: 20
: 2
: 15
: 20
: 6
: Disabled
: dot1ad
: Enabled
: MSTP
: 20
: 15
: 20
: 6
: Disabled
: dot1ad
Used to display the Switch's current STP ports configuration.
show stp ports <portlist>
This command displays the STP ports settings for a specified port or group of ports (one port
at a time).
<portlist> − Specifies a port or range of ports to be viewed. Information for a single port is
displayed. If no ports are specified the STP information for port 1 will be displayed. Users
may use the Space bar, p and n keys to view information for the remaining ports.
None.
95