BMW S 1000 RR Rider's Manual page 136

9
134
Push down retainer 2 (using a
screwdriver if necessary) and
pull socket 3 out of the head-
light housing.
z
Remove bulb 4 from the
socket.
Replace the defective bulb.
Bulb for parking light
W5W / 12 V / 5 W
Use a clean, dry cloth to hold
the new bulb in order to keep
the glass free of foreign matter.
Insert bulb 4 into the socket.
Install socket 3 in the headlight
housing, making sure that re-
tainer 2 engages
Install the cover.
Replacing turn indicator
bulbs, front and rear
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.