ing brake-caliper carrier 10 for-
ward at the same time.
Roll the rear wheel as far
forward as possible and loop
chain 7 over the sprocket.
Insert right adjusting plate 6
into the swinging arm with
stop 12 to the front.
Lift the rear wheel and work
quick-release axle 5 through
the adjusting plate and into the
brake-caliper carrier and the
rear wheel.
Make sure that the quick-re-
lease axle is seated against the
stop of the adjusting plate.
Insert left adjusting plate 4.
Install axle nut 1 with its
washer, but do not tighten the
nut at this point.
Engage the brake line in
holder 8.
9
127
z