Changing A Wiper Blade; Very Cold Climate Screen - CITROEN DS4 Owner's Handbook Manual

Changing a wiper blade

Before removing a front
wiper blade
Within one minute after switching off
the ignition, operate the wiper stalk to
position the wiper blades vertically on the
windscreen.
Removing
Raise the corresponding wiper arm.
Unclip the wiper blade and remove it.
Fitting
Put the corresponding new wiper blade in
place and clip it.
Fold down the wiper arm carefully.
After fitting a front wiper
blade
Switch on the ignition.
Operate the wiper stalk again to park the
wiper blades.
Practical information

Very cold climate screen *

Removable protective screen which prevents
the accumulation of snow at the radiator
cooling fan.
Fitting
Offer up the very cold climate screen to
the front of the lower section of the front
bumper.
Press around its edge to engage its fixing
clips one by one.
Removal
Use a screwdriver as a lever to release
each fixing clip in turn.
Do not forget to remove the very cold
climate screen:
- when the ambient temperature
exceeds 10 °C,
- when towing,
- at speeds above 75 mph (120 km/h).
* According to country.
273