CITROEN C8 2002 Handbook page 83

HYDRAULIC CLUTCH CONTROL SPECIFICATION
Engines : RFN-3FZ-RHT-RHW-4HW
Bleeding the hydraulic clutch control (continued).
Top up the brake fluid level to the MAXIMUM of the brake fluid reservoir capacity.
Declutch and clutch rapidly 40 times.
Start the engine.
Apply the handbrake.
Engage a gear.
Check that the clutch starts to engage at a dimension (X) greater than or equal to 35 mm
(Dimension (X) is given as a guide).
NOTE : If incorrect, repeat the bleed operations.
Tighten the bleed screw (1) to 0.75.m.daN.
B2BK065C
81