CITROEN C8 2002 Handbook page 107

AXLE GEOMETRY (SETTING AT REFERENCE HEIGHT)
At the rear (H2).
Engage the slings [5] on the rear longerons.
Position the suspension compressor [1] selecting the separation (A) most suited to pull the
straps as far upwards as possible.
B3BKAEHD
Compress the suspension so as to obtain, on the RH and LH sides, the bodyshell height
H2 (reference height), to be measured between the lowermost edge (C) and the ground.
WARNING : take account of pivoting surfaces when measuring the reference height H2.
Check that the height H1, measured already at the front, has not changed.
WARNING : The rear axle angles are not adjustable.
B3BKAEKD
105