D-Link DES-6000 User Manual page 95

Modular Ethernet Switch User's Guide
Click New to access the Static Forwarding Table --- Edit window:
Figure 7-12. Static Forwarding Table --- Edit window
To use the MAC forwarding function, enter the MAC Address of the device to which the specified port
permanently forwards traffic in the MAC address field. Then enter the VLAN ID, Module, and Port number
that permanently forwards traffic from the specified device in the last three fields. Click Apply to let your
changes take effect.
MAC Address Filtering Table
Figure 7-13. Static MAC Address Filtering window
The static filtering function filters out all traffic from unwanted devices by defining the MAC address to be
filtered. All packets with the MAC address in the source or destination fields will be filtered. If VLANs are
enabled, you must also specify the VID on which to filter the packets.
Click New to access the Static MAC Address Filtering --- Edit window:
Web-Based Network Management 85