D-Link DES-6000 User Manual page 113

Modular Ethernet Switch User's Guide
The information is described as follows:
♦ Update Interval
Suspend.
♦ Clear button Clicking on this button resets all counters in the tables on this page to the value zero.
♦ 64
The total number of packets (including bad packets) received that were 64 octets in length
(excluding framing bits but including FCS octets).
♦ 65-127 The total number of packets (including bad packets) received that were between 65 and 127
octets in length inclusive (excluding framing bits but including FCS octets).
♦ 128–255 The total number of packets (including bad packets) received that were between 128 and
255 octets in length inclusive (excluding framing bits but including FCS octets).
♦ 256-511 The total number of packets (including bad packets) received that were between 256 and 511
octets in length inclusive (excluding framing bits but including FCS octets).
♦ 512-1023 The total number of packets (including bad packets) received that were between 512 and
1023 octets in length inclusive (excluding framing bits but including FCS octets).
♦ 1024-1536 The total number of packets (including bad packets) received that were between 1024 and
1536 octets in length inclusive (excluding framing bits but including FCS octets).
♦ Rx (good) The number of good frames received. This also includes local and dropped packets.
♦ Tx (good) The number of good frames sent from the respective port.
♦ Total Rx The number of frames received, good and bad.
♦ Tx Octets The number of good bytes sent from the respective port.
♦ Rx Octets The number of good bytes received. This also includes local and dropped packets.
♦ Total Rx The number of bytes received, good and bad.
♦ Unicast Rx/Tx The total number of good packets that were received by and directed to a unicast
address. Note that this does not include dropped unicast packets
♦ Multicast Rx/Tx The total number of good packets that were received by and directed to a multicast
address. Note that this number does not include packets directed to the broadcast address
♦ Broadcast Rx/Tx
broadcast address. Note that this does not include multicast packets.
Web-Based Network Management
Choose the desired setting: 5 seconds, 15 seconds, 30 seconds, 60 seconds or
The total number of good packets that were received by and directed to a
103