D-Link DES-6000 User Manual page 62

Modular Ethernet Switch User's Guide
802.1Q IGMP
Figure 6-25. IEEE 802.1Q IGMP Configuration screen
Choose Add/Remove IGMP Entry from the screen above to define up to 24 VLANs on the Switch which can
send and receive IGMP packets:
Figure 6-26. Add/Remove IGMP Entry screen
The above window is used to specify an agent to interface between IGMP and VLAN. The agents are assigned
to a VLAN and allow IGMP query and report packets to be present on the given VLAN. Only 24 agents can
exist on the switch at any one time.
Items in the above window are described below:
♦ Action Adds/Removes an entry (agent) from the table.
♦ VID The VLAN number that you wish to create an agent for.
♦ Apply Adds the agent to the table.
Go back to the IEEE 802.1q IGMP Configuration menu and choose Configure IGMP Entry in order to
activate/deactivate the agents and configure settings for them.
52 Using the Console Interface