D-Link DES-6000 User Manual page 103

Modular Ethernet Switch User's Guide
Figure 7-26. Configure MAC-based Broadcast Domain Member window
Items in this window are defined as follows:
♦ MAC Address The MAC Address of the broadcast domain member.
♦ Description The broadcast domain the member belongs to.
♦ Status Indicates whether the entry is Active or Inactive. To make entries active, the switch needs to be
restarted in the appropriate VLAN or broadcast domain mode.
Click the X in the Delete column next to an entry to remove it from the table.
Click on the pointer icon to edit a specific entry, or click New to add an entry in the Configure MAC-based
Broadcast Domain Member --- Edit window:
Figure 7-27. Configure MAC-Based Broadcast Domain Member --- Edit window
To add or edit a MAC-based broadcast domain member, enter the MAC address and description in the fields
offered.
Items in this window are defined as follows:
♦ MAC Address The MAC address of the member you wish to add.
♦ Description The name of the broadcast domain to add a member to.
Click Apply to let the changes take effect.
Web-Based Network Management 93