Figure 49: WPA/WPA2
Radius Server IP - Enter the IP address of the RADIUS Server.
■
Radius Port - Enter the port that the RADIUS service uses.
■
Radius Password - Enter the password for the RADIUS server.
■
Group Key Update Period - Specify the group key update interval
■
in seconds. The value should be 30 or above. Enter 0 to disable the
update.
WPA-PSK/WPA2-PSK - The WPA/WPA2 authentication type based on
◆
a pre-shared passphrase.
Version - You can choose the version of the WPA-PSK security from
■
the drop-down list. The default setting is Automatic, which can
select WPA-PSK (Pre-shared key of WPA) or WPA2-PSK (Pre-shared
key of WPA2) automatically based on the wireless station's
capability and request.
Encryption - When WPA-PSK or WPA is set as the Authentication
■
Type, you can select either Automatic, TKIP, or AES as the
encryption type.
If you check the WPA-PSK/WPA2-PSK radio button and choose TKIP
N
:
OTE
encryption, you will find a notice in red, as shown in
Figure 50: WPA-PSK
PSK Passphrase - You can enter between 8 and 63 ASCII
■
characters, or 8 to 64 Hexadecimal characters.
– 67 –
| Configuring the Router
C
4
HAPTER
Figure
50.
Wireless