Out Of Balance Recovery Routine - Fisher & Paykel excellence GWL12 Installation Instructions And User Manual

Changing Pre-set Options
Out-of-Balance Recovery Routine
When your Smart Drive™ is spinning it can sense if the wash load is out-of-balance and will stop
and re-try spinning up to 3 times. If it still senses an unbalanced load there are two options the
machine can take.
Automatic Recovery Option
Your Smart Drive™ will try to automatically correct
the out-of-balance load. It will fill with water and
agitate to redistribute the load before trying to
spin up again.
Machine stops Option
Your Smart Drive™ will stop, give a short burst of
beeps every 5 seconds, and the RINSE or SPIN
light will flash. You must redistribute the load
more evenly yourself. (Use this option if you wish
to conserve water).
30
REGULAR
light on = automatic recovery
REGULAR
light off =machine stops