Setting Sound Field Program Parameters; Prohibiting Setting Changes - Yamaha RX-V367 Owenrs Manual

■
Goes enter standby mode automatically
when you leave it without operating
AutoPowerDown
If you do not operate this unit or use the remote control for an
extended period of time, it will automatically go into standby mode
(Auto Power Down function). This function's default setting is
"Off." When you wish to activate this function, set the amount of
time to pass before this unit will enter standby.
Off (Default) Auto Power Down function is disabled.
4hours Goes into standby mode, when you have not operated
this unit for four hours.
8hours Goes into standby mode, when you have not operated
this unit for eight hours.
12hours Goes into standby mode, when you have not operated
this unit for twelve hours.
This unit starts a countdown of 30 seconds before entering the
standby mode. Pressing any key of the remote control during the
countdown cancels entering the standby mode and reset the
timer.
■
Setting the brightness of the front panel
display
Dimmer
Sets the brightness of the front panel display. Lowering the setting
dims the display.
Adjustable range -4 to 0
Default setting 0

Setting sound field program parameters

You can set the parameters for the sound field programs
SETUP
DSP Parameter

Prohibiting setting changes

SETUP
Memory Guard
Prohibits setting changes to prevent careless changes being made
to the settings on Setup menu.
Off (Default)
Settings are not protected.
On
Prohibits changes to the settings on Setup menu until
it is returned to "Off."
While set to "On," the unit displays "Memory
Guard!" when an attempt is made to change the
settings.
Setting various functions (Setup menu)
(☞p. 44).
VOL.
SW
C
L R
SL SR
VOL.
SW
C
L R
SL SR
SETUP
43
En