43-956.fm Page 14 Monday, August 16, 1999 3:20 PM
CONNECTING TO THE PHONE LINE
CONNECTING TO A SINGLE LINE
The module connects to the phone line and your phone using two modular tele-
phone-line connectors. If your phone line does not have this type of connector,
you can get the necessary adapters at your local Radio Shack store. Or, you can
have the telephone company update your telephone wiring.
Note: The telephone company can charge you to update the telephone wiring.
The USOC number of the jack to be installed is RJ11C (for a single-line phone)
or RJ14C (for a two-line phone).
Follow these steps to connect the module to the phone line.
1. Unplug the phone's cord from the phone line jack and plug this cord into
either of the module's telephone line connectors.
14