Threading The Machine - Husqvarna Viking Emerald 122 User Manual

1
3
4
5
1
2
3
4 5
14
2

Threading the Machine

Turn off the power switch
Make sure the presser foot is raised and
the needle is in the up position.
1
Bring the thread from the spool and
pass it through the thread guide.
Then draw it down along the right
slot.
2
Guide the thread around the bottom
of the thread guide plate.
3 Firmly draw the thread from right to
left over the take-up lever and down
into the take-up lever eye.
4 Slide the thread from the left behind
the needle bar thread guide.
5
Use the needle threader to thread
the needle (see page 15).