Sharp GX10i Service Manual page 6

GX10i
(2) If SPC is correct, the following screen appears.
The software for each function is independent and thus multi-bootable. However, you can only activate single software at
a time. To start snother software, exit the current one.
3.3. Functions
3.3.1 Identification
SPST downloads and displays the main data configured in GX10i.
<Operation>
(1) On the SPST startup screen, press "Identity".
(2) Connect PC and MS with a Data cable.
(3) Remove the SIM card and turn on the phone.
(4) Select the COM port.
(5) Press "Get Identity".
(6) IMEI will be displayed, and the following dialog box appears.
(7) Make sure GX10i is turned off and press the power key.
(8) Press "OK" when **** appears on the GX10i display.
CONFIDENTIAL
Figure 2
Figure 3
Regular display.
The information will be displayed.
Figure 4
2 – 2