Voice Announce Unit (Vau) - NEC i-Series Alphanumeric Display Feature Handbook

Voice Announce Unit (VAU)

This feature requires a Voice Announce Unit (VAU).
You can record the Voice Announce Unit (VAU) messages your sys-
tem uses for Automated Attendant greetings (page 16) and the General
Message (page 51). If your system has incoming 900 service, you can
also record the message that plays to those callers before automatic
billing occurs. You can record up to 16 separate messages, with a
combined recording time of 128 seconds.
To record, listen to or
erase a VAU Message:
124
1. +
2. To record, dial
OR
To listen, dial
OR
To erase, dial
3. Dial the VAU message number (01-16)
you want to record, listen to or erase.
If recording, begin when you hear the
announcement, "Please start record-
ing." When done, press # to check what
you recorded.
When listening to a message, press #
to hear the message again.
If erasing, you can cancel erasing by
pressing HOLD before hanging up.
4. to hang up.
.
.
.
.