NEC i-Series Alphanumeric Display Feature Handbook page 34

Caller ID
To Automatically Add
New Numbers to the
Caller ID Table:
28
You can store the Caller ID data in the sys-
tem's Caller ID Table or in one of your One
Touch keys.
1. Press
2. To store a number in a One Touch key:
Dial (Personal) + Press
Press One Touch key that will store the
Caller ID information + (Optional - if
name is not sent from telco) If you see
ENTER NAME, enter the name you
want to associate with the stored number.
To store a number in a Common
Abbreviated Dialing Bin:
Dial (Company) + Press
Dial the bin number in which you want
to store the number (0-999) + (Optional -
if name is not sent from telco) If you see
ENTER NAME, enter the name you
want to associate with the stored number.
You cannot edit a name if it was sent
from the telco.
Press
and lower case letters.
For information on entering names,
refer to the Name Storing feature.
When entering information into the
company Caller ID Table, if the table is
full, you will see a TABLE IS FULL
message after pressing
(Caller ID Edit).
to toggle between upper
(Company).
+
+