Conference - NEC i-Series Alphanumeric Display Feature Handbook

Multibutton telephone
Table of Contents

Advertisement

Conference lets you add additional inside and outside callers to your
conversation. With Conference, you can set up a multiple-party tele-
phone meeting without leaving the office. The system allows either
four or eight parties maximum per Conference.
In addition to Conference, there are other ways to have a telephone meet-
ing. See Voice Call Conference (page 34), Meet Me Conference (page
63), Meet Me Paging (page 65) and Tandem Trunking (page 115).
To set up a

Conference:

To exit a Conference
(without affecting the
other parties):
1. Place or answer call.
2.
or
3. Place or answer next call.
To access the outside call, either
press
code. See Outside Calls on pages 84
and 86 for more.
4.
or
You may be able to have up to 32
callers. Repeat this step to add more
parties.
5. After adding all parties, press
again to begin the Conference.
1.
to hang up.
You can set up a Conference with two
outside callers and then drop out of the
call - leaving the callers talking in an
Unsupervised Conference. Refer to
Tandem Trunking on page 115 for more.
Conference
(Conference).
or dial a trunk access
(Conference).
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

I-seriesI-series multibutton telephone

Table of Contents