Blade Switch; Blade-Switch; Ignition Switch; Ignition Switch - Husqvarna LZ5227TXPKOA, LZ6123LTKOA, LZ6127TKOA, LZ6130TXPKOA, LZ7230TXPKOA Operator's Manual

5. Blade switch

In order to engage the mower deck, pull the
knob out; the mower blades are disengaged
when the knob is depressed.

6. Ignition Switch

The ignition key is placed on the driver's
panel and is used to start and stop the
engine.
IMPORTANT INFORMATION
Do not run the starter for more than five
seconds each time. If the engine does not
start, wait about 10 seconds before re-
trying.

7. Fuses

The fuses are located in a holder to the left of
the hydraulic tank. They are flat pin fuses of
the same type used in automobiles.
There are three fuses, as well as socket for
one spare fuse.
Fuse ratings and functions:
• 20 A, Primary fuse.
• 7.5 A, Mower deck coupling.
• 7.5 A, Accessory outlet
• Socket for spare fuse.
CONTROLS
Blade Switch
Ignition key and hour meter

Fuses

8011-510
8011-521
8011-746
19
English-