Status Leds; About Your Router - ZyXEL Communications VMG8324 User Manual

4. About your router

On the top of your router, you will find a number of status LEDs that indicate the status
of the device. These lights can be useful to help you troubleshoot any problems with
your connection.
LEDs on the device:
Note: The Wifi 5G is only applicable to the VMG8924 Router
None of the LEDs are on if the Device is not receiving power.
LED COLOUR
POWER
Green
PWR/SYS
DSL
Green
Orange
INTERNET
Green
Internet User Guide- Zyxel VMG8324/VMG8924
STATUS
On
Blinking
On
Red
Off
On
Blinking
On
Blinking
Off
On
Blinking
Off
On
Red
DESCRIPTION
The device is receiving power and ready for use
The Device is self testing
The Device detected an error whilst self testing, or
there is a device malfunction
The Device is not receiving power
The ADSL line is up
The Device is initializing the ADSL line
The VDSL line is up
The Device is initializing the VDSL line
The DSL line is down
The Device has an IP connection but no traffic.
Your Device has a WAN IP address (either static
or assigned by a DHCP server), PPP negotiation
was successfully completed (if used) and the DSL
connection is up.
The Device is sending or receving IP traffic.
There is no Internet connection or the gateway is in
bridged mode.
The Device attempted to make an IP connection but
failed. Possible causes are no response from a DHCP
server, no PPPoE response, PPPoE authentication
failed.
16
routers
Last Amended:11/03/2014