Night View Assist; Messages In The Multifunction Display - Mercedes-Benz CL Operator's Manual

Cl class
Hide thumbs Also See for CL:
Table of Contents

Advertisement

Vehicle status messages in the multifunction display
438
Display messages
¨
¨
Á
Á
Á
Á
Possible causes/consequences and X Solutions
STOP Car
The AIRMATIC is malfunctioning.
Too Low
X
Avoid excessive steering maneuvers. The fenders or tires
could otherwise be damaged. Listen for scraping noises.
X
Stop and press the vehicle level control switch to select a
higher vehicle level (
X
Do not drive faster than 50 mph (80 km/h).
X
Contact an authorized Mercedes-Benz Center as soon as
possible.
There is otherwise danger of an accident.
Malfunctio
The capability of the AIRMATIC system is restricted. This can
n
impair the handling.
X
Do not drive faster than 50 mph (80 km/h).
X
Have the vehicle checked at an authorized Mercedes-Benz
Center.
Night
The Night View Assist is malfunctioning.
View
X
Contact an authorized Mercedes-Benz Center as soon as
Assist
possible.
Inoperativ
e
Night
The temperature of the Night View Assist camera is too high
View
(
Y
page 333).
Assist
X
Wait until the message Night View Assist Available
Currently
Again appears.
Unavailabl
In addition you can:
e
X
Swing the camera cover down (
X
Adjust the air distribution of the climate control so that air
flows upward (
Night
You have tried to switch on Night View Assist, but the exterior
View
lamp switch is not set to c or L.
Assist
X
Turn the exterior lamp switch to c or L
Lights
(
Y
page 275).
Must Be
Set to
AUTO or ON
Night
You have tried to switch on Night View Assist while the
View
automatic transmission was in reverse gear R.
Assist
X
Shift the automatic transmission to park position P, neutral
Not In
position N or drive position D (
Reverse
Gear
Y
page 317).
Y
page 407).
Y
page 195).
Y
page 291).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cl 550 4maticCl 600Cl 63 amgCl 65 amg

Table of Contents