Memory Functions - Mercedes-Benz COMAND Operator's Manual

Satellite radio*
Satellite radio operation
Automatic station scan
The stations in the selected category can
be scanned in numerical order for 8 sec-
onds each.
In the Satellite radio main menu, press
the Scan soft key.
The scan function will begin.
Ending scan function and playing a
station
Press the Scan soft key again.
The station selected will appear with
the station name. Scan will appear in
white lettering again.
118
Station selection via direct channel
entry
Press *.
Input line will appear.
Enter the desired channel number with
the number keys, e.g. 24 for chan-
nel 24.
The channel you have selected will be-
gin to play. The corresponding station
name will appear, if station is available.

Memory functions

i
There are 10 presets available.
You can use the following functions:
Saving stations manually
Selecting a station from the Satellite
preset memory ( page 119)
Selecting a station by entering the
channel number ( page 118)
Saving station manually
In the Satellite radio main menu
Press one of the number keys, e.g. 2,
longer than 2 seconds.
You will hear a verification beep if the
beep tones option was activated in the
system settings ( page 209).
The satellite radio saves the current
station at the memory preset selected.
The memory preset selected will ap-
pear in the status line, e.g. SAT2 .