Mercedes-Benz COMAND Operator's Manual page 205

Hide thumbs Also See for COMAND:
Table of Contents

Advertisement

1 Ejecting DVD
2 Opening/closing the display unit
3 Warning message
Press EJECT to
close
You can update the system with a new
navigation DVD. The DVD may include new
map/road information.
Warning
The display unit can cause injury if
contacted when open. Please close after
inserting a navigation DVD.
!
Do not place anything on the lowered
display panel (i.e. do not use as a shelf).
Placing objects on the lowered display
panel may result in damage to the
display or COMAND unit which is not
covered by the Mercedes-Benz Limited
Warranty.
i
Updating may take several minutes.
During updating, the operation of
COMAND is restricted. You cannot
switch off the system.
Starting an update
DVDs are loaded and ejected at the
G
navigation module.
i
The navigation module is located
behind the display unit of the COMAND
( page 204).
i
There are two l buttons. One is on
the display unit 2. The other is located
left of the DVD NAVIGATION slot 1
behind the display.
Switch the COMAND on ( page 37).
Navigation*
Software Updates
Ejecting
Press l.
The display unit moves forward and
then tilts down. The DVD NAVIGATION
slot is visible.
Press the l button left of the
DVD NAVIGATION slot.
The navigation module ejects the DVD.
The message
No DVD in drive.
Please insert Navigation DVD.
will appear.
Remove the DVD from the slot.
205

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents