Mercedes-Benz COMAND Operator's Manual page 48

Audio
Radio operation
FM- and AM-Bands
Press g or h.
or
Push the joystick to g or G.
The radio will tune to the frequency
assigned to the next memory location.
If none has been set by you, the radio
will not change the station.
Via frequency
i
Frequenc. must be activated in the
Audio search function
which appears in the multifunction
display.
Access this menu from the
Settings... menu via the
submenu ( page 33). For additional
information refer to separate Operator's
Manual instructions.
48
Press g or h.
or
Push the joystick to g or G.
The radio will tune to the next
receivable station (FM, AM) or channel
(WB) of descending/ascending
frequency depending on the direction
of seek.
WB direct channel selection
Press a number key 1 through 7.
i
menu, The selected channel is not shown in
the status line.
Vehicle
Manual tuning (FM, AM)
Activate the desired wave band
( page 46).
Press g or h longer than 2 sec-
onds.
The function rapidly scans the
frequencies.
Press g or h repeatedly to
change the frequency step by step.
or
Push the joystick to H or h.
Each push of the joystick will change
the frequency by one step.
FM Band
The frequency displayed will change in
increments of 0.2 MHz.
AM Band
Tuning will take place in increments of
10 kHz.