To Remove Hood And Grill Assembly; To Adjust Carburetor - Husqvarna LOYTH20F42T Operator's Manual

TO REMOVE HOOD AND GRILL AS-
SEM BLY
1. Raise hood.
2. Unsnap headlight wire connector.
3. Stand in front of tractor. Grasp hood at
sides, tilt toward engine and lift off of
tractor.
4. When replacing hood, be sure to re-
connect the headlight wire con nec tor.
Hood
02778
Headlight Wire
Connector
ENGINE
TO AD JUST THROTTLE CON TROL
CABLE
The throttle control has been preset at
the factory and ad just ment should not be
necessary Check adjustment as described
below before loosening cable. If adjust-
ment is nec es sary, see engine manual.

TO ADJUST CARBURETOR

Your carburetor has been preset at the
factory and adjustment should not be nec-
essary. However, minor adjustment may
be required to compensate for differences
in fuel, temperature, altitude or load . If the
engine does need adjustment, see engine
manual.
26