Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Operator's Manual
Gasoline containing up to 10% ethanol (E10) is accept-
able for use in this machine. The use of any gasoline ex-
ceeding 10% ethanol (E10) will void the product warranty.
Manual de Operario
Esta máquina puede utilizar gasolina con un con-
tenido de hasta el 10% de etanol (E10). El uso de una
LTH1842 / 96041041200
gasolina que supere el 10% de etanol (E10) anulará la
garantía del producto.
Please read the operator's manual carefully and make sure
you understand the instructions before using the machine.
115 94 26-49
Por favor lea cuidadosamente y comprenda
English/Spanish
estas intrucciones antes de usar esta maquina.

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for Husqvarna 96041041200

  • Page 1 Manual de Operario Esta máquina puede utilizar gasolina con un con- tenido de hasta el 10% de etanol (E10). El uso de una LTH1842 / 96041041200 gasolina que supere el 10% de etanol (E10) anulará la garantía del producto. Please read the operator's manual carefully and make sure you understand the instructions before using the machine.
  • Page 2: Safety Rules

    SAFETY RULES Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. • Be alert and turn machine off if a child enters the area. WARNING: In order to prevent ac ci den tal •...
  • Page 3 SAFETY RULES Safe Operation Practices for Ride-On Mowers III. SLOPE OPERATION • Never remove gas cap or add fuel with the engine running. • Allow engine to cool before refueling. WARNING! When loading or unloading • Never fuel the machine indoors. this machine, do not exceed the maximum •...
  • Page 4: Table Of Contents

    SUPPORT / HELP If you require assistance or have questions concerning the application, operation, maintenance or parts for your product: • Visit our website: www.husqvarna.com • Call Us Toll Free: 1-800-487-5951 TABLE OF CONTENTS SAFETY RULES ............2-3 MAINTENANCE SCHEDULE ........
  • Page 5: Unassembled Parts

    UNASSEMBLED PARTS Steering Wheel (1) Lock Washer Steering (1) Large Wheel Insert Flat Washer Steering Wheel (1) Hex Bolt Steering Steering Wheel Extension Steering Boot Adapter Shaft Seat *Installed by Dealer *Brush Guard Kit Washer Battery (1) Seat Hex Bolt (2) Hex Bolts (2) Nut Keps Hood...
  • Page 6: Assembly

    ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness.
  • Page 7 ASSEMBLY INSTALL SEAT (See Figs. 3 - 5) WARNING: Ensure the seat assembly is securely fastened to the seat pan before occupying or operating • Remove bolts and winged washers se cur ing seat to tractor. cardboard packing and set aside for as sem bly of seat to tractor.
  • Page 8 ASSEMBLY NOTE: You may now roll your tractor off the skid. Continue ✓CHECKLIST using the instructions that follow to remove the tractor from BEFORE YOU OPERATE YOUR NEW TRAC TOR, WE the skid. WISH TO ASSURE THAT YOU RECEIVE THE BEST WARNING: Before start ing, read, un der stand and fol- PERFORMANCE AND SATISFACTION FROM THIS low all in struc tions in the Op er a tion section of this man u al.
  • Page 9: Operation

    OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. REVERSE NEUTRAL HIGH CHOKE FAST SLOW IGNITION SWITCH ENGINE ENGINE ENGINE DIFFERENTIAL CLUTCH/ PARKING MOWER MOWER START LOCK BRAKE PEDAL BRAKE HEIGHT LIFT...
  • Page 10 OPERATION KNOW YOUR TRACTOR READ THIS MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. Fig. 7 Our tractors conform to the applicable safety standards of the American National Standards Institute.
  • Page 11 OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor or per form ing any ad just ments or repairs. We rec om mend standard safety glasses or a wide vision safety mask worn over spectacles.
  • Page 12 OPERATION TO MOVE FORWARD AND BACKWARD TO ADJUST GAUGE WHEELS (See Fig. 13) (See Fig. 11) Gauge wheels are prop er ly ad just ed when they are slight ly off the ground when mower is at the desired cutting height in The direction and speed of movement is controlled by the operating position.
  • Page 13 OPERATION TO TRANSPORT (See Fig. 15) REVERSE OPERATION SYSTEM (ROS) When push ing or tow ing your trac tor, ensure transmission Your tractor is equipped with a Reverse Operation System is disengaged by placing freewheel control in free wheel ing (ROS).
  • Page 14 OPERATION BEFORE STARTING THE ENGINE TO START ENGINE (See Fig. 7) When starting the engine for the first time or if the engine CHECK ENGINE OIL LEVEL has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.
  • Page 15 OPERATION PURGE TRANSMISSION MOWING TIPS • DO NOT use tire chains when the mower hous ing is CAUTION: Never engage or disengage free- attached to tractor. wheel lever while the engine is run ning. • Mower should be properly leveled for best mowing performance.
  • Page 16: Maintenance Schedule

    MAINTENANCE BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE MAINTENANCE SCHEDULE EACH SEASON STORAGE HOURS HOURS HOURS HOURS Check Brake Operation Check Tire Pressure Check Operator Presence and ROS Systems Check for Loose Fasteners Check/Replace Mower Blades Lubrication Chart Check Battery Level Clean Battery and Terminals Clean Debris off Steering Plate Check Transaxle Cooling...
  • Page 17: Maintenance

    MAINTENANCE TRACTOR BLADE CARE For best results mower blades must be kept sharp. Re place Always observe safety rules when per form ing any bent or damaged blades. main te nance. BRAKE OPERATION CAUTION: Use only a replacement blade ap- proved by the manufacturer of your tractor.
  • Page 18 MAINTENANCE TRANSAXLE MAINTENANCE TO CHANGE ENGINE OIL (See Fig. 19 & 20) The transmission fan and cooling fins should be kept clean Determine temperature range expected before oil change. to ensure proper cooling. All oil must meet API service classification SJ-SN. Do not attempt to clean fan or transmission while engine •...
  • Page 19 MAINTENANCE IN-LINE FUEL FILTER (See Fig. 21) ENGINE OIL FILTER The fuel filter should be replaced once each season. If fuel Replace the engine oil filter every season or every other oil filter becomes clogged, ob struct ing fuel flow to car bu re tor, change if the tractor is used more than 100 hours in one year.
  • Page 20: Service And Adjustments

    SERVICE AND ADJUSTMENTS WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER VICE OR AD JUST MENTS: • Depress brake pedal fully and set parking brake. • Place attachment clutch in “DISENGAGED” position. • Turn ignition key to “STOP” and remove key. •...
  • Page 21 SERVICE AND ADJUSTMENTS • ATTACH MOWER SIDE SUSPENSION ARMS (A) TO • ATTACH FRONT LINK (E) - Work from left side of trac- CHASSIS - Position hole in arm over pin (B) on outside tor. Insert rod end of link assembly through front hole of tractor chassis and secure with retainer spring.
  • Page 22 SERVICE AND ADJUSTMENTS TO LEVEL MOWER FRONT-TO-BACK ADJUSTMENT (See Figs. 31 & 32) IMPORTANT: Deck must be level side-to-side. Ensure tires are properly inflated to the PSI shown on tires. If tires are over or under inflated, it may affect the appear- To obtain the best cutting re sults, the mower blades should ance of your lawn and lead you to think the mower is not be adjusted so the front tip is 1/8"...
  • Page 23 SERVICE AND ADJUSTMENTS TO REPLACE MOWER BLADE DRIVE BELT • Disconnect clutch wire harness (A). (See Fig. 33) • Remove anti-rotation link (B) on right side of tractor. • Remove belt from stationary idler (C) and clutching MOWER DRIVE BELT REMOVAL idler (D).
  • Page 24 SERVICE AND ADJUSTMENTS TO CHECK BRAKE TO START ENGINE WITH A WEAK BATTERY (See Fig. 36) If tractor requires more than five (5) feet (1,5 m) to stop at highest speed in high est gear on a level, dry concrete or paved surface, then brake must be serviced.
  • Page 25 SERVICE AND ADJUSTMENTS TO REMOVE HOOD AND GRILL ASSEMBLY REPLACING BATTERY (See Fig. 37) (See Fig. 38) WARNING: Do not short battery ter mi nals • Raise hood. by allowing a wrench or any other object • Unsnap headlight wire connector. to contact both terminals at the same •...
  • Page 26: Storage

    STORAGE ENGINE Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. FUEL SYSTEM IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS WARNING: Never store the trac tor with FROM FORMING IN ES SEN TIAL FUEL SYSTEM PARTS SUCH gas o line in the tank inside a building AS CARBURETOR, FUEL FIL TER, FUEL HOSE, OR TANK...
  • Page 27: Trou Ble Shoot Ing

    TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION 1. Out of fuel. 1. Fill fuel tank. Will not start 2. Engine not “CHOKED” properly. 2. See “TO START ENGINE” in Operation section. 3. Engine flooded. 3. Wait several minutes before attempting to start. 4.
  • Page 28 TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION Engine continues to 1. Faulty operator-safety presence control 1. Check wiring, switches and connections. If not system. corrected, contact an authorized service center/ run when operator department. leaves seat with attachment clutch CAUTION: DO NOT operate machine until engaged problem is corrected.
  • Page 30: Español

    REGLAS DE SEGURIDAD Prácticas de Operación Seguras para las Segadoras Conducibles PELIGRO: ESTA MAQUINA CORTADORA ES CAPAZ DE AMPUTAR LAS MANOS Y LOS PIES Y DE LANZAR OBJETOS. SI NO SE OBSERVAN LAS INSTRUCCIONES DE SEGURIDAD SIGUIENTES SE PUEDEN PRODUCIR LESIONES GRAVES O LA MUERTE. •...
  • Page 31 REGLAS DE SEGURIDAD Prácticas de Operación Seguras para las Segadoras Conducibles • Mantener la máquina libre de hierba, hojas u otros es- • Apagar todos los cigarrillos, cigarros, pipas y otras fuentes combros que pueden tocar el tubo de escape / partes del de ignición.
  • Page 32: Especificaciones Del Producto

    SOPORTE/AYUDA Si necesita asistencia o tiene alguna pregunta acerca de la aplicación, operación, mantenimiento o piezas de su producto: • Visite nuestro sitio web: www.husqvarna.com • Llámenos de manera gratuita al: 1-800-487-5951 TABLA DE MATERIAS REGLAS DE SEGURIDAD ........
  • Page 33: Piezas Sin Montar

    PIEZAS SIN MONTAR Volante de dirección Arandela de seguridad Inserto del Arandela volante de Volante de dirección dirección Perno hexagonal Accesorio de transción Eje de Adaptador Extención de la dirección *Instalado por el distribuidor Asiento *Juego de cubierta Arandela Batería Perno hexagonal Asiento (2) Tuerca...
  • Page 34: Montaje/Pre Operación

    MONTAJE Su tractor nuevo ha sido montado en la fábrica con la excepción de aquellas partes que no se han montado por razones de envío. Para asegurarse que su tractor funcione en forma adecuada y segura todas las partes y los artículos de ferretería que se monten tienen que ser apretados en forma segura.
  • Page 35 MONTAJE INSTALACIÓN DEL ASIENTO (Vea Figs 3 - 5) ADVERTENCIA Asegúrese que el montaje del asiento está ajustado firmemente en la base antes de usar u operar el tractor. • Quite los pernos de ajuste y las arandelas con aletas que aseguran el asiento al empaque de cartón y póngalos a un •...
  • Page 36 MONTAJE ✓ AVISO: Ahora puede sacar el tractor de la tarima. Continúe usando LISTA DE REVISIÓN las instrucciones que siguen para retirar el tractor de la tarima. ADVERTENCIA: Antes de empezar, leer, entender y seguir ANTES DE OPERAR Y DE DISFRUTAR DE SU TRACTOR todas las instrucciones presentes en la sección Operaciones NUEVO, LE DESEAMOS QUE RECIBA EL MEJOR RENDIMIENTO Y LA MAYOR SATISFACCION DE ESTE...
  • Page 37: Operación

    OPERACIÓN Estos símbolos pueden aparecer sobre su tractor o en la literatura proporcionada con el producto. Aprenda y comprenda sus significados. MARCHA NEUTRO ALTO BAJO ESTRANGU- RÁPIDO LENTO INTERRUPTOR ATRÁS LACIÓN DE IGNICIÓN MOTOR MOTOR MOTOR EL CIERRE PEDAL DE FRENO DE ALTURA LEVANTA-...
  • Page 38 OPERACIÓN FAMILIARICESE CON SU TRACTOR LEA ESTE MANUAL Y LAS REGLAS DE SEGURIDAD ANTES DE OPERAR SU TRACTOR Compare las ilustraciones con su tractor para familiarizarse con las ubicaciones de los diversos controles y ajustes. Guarde este manual para referencia en el futuro. Fig.
  • Page 39 OPERACIÓN La operación de cualquier tractor puede hacer que salten objetos extraños dentro de sus ojos, lo que puede producir daños graves en éstos. Siempre use anteojos de seguridad o pro tec cio nes para los ojos mientras opere su tractor o cuando haga ajustes o reparaciones. Recomendamos gafas de seguridad o una máscara de visión amplia de seguridad usada sobre las gafas.
  • Page 40 OPERACIÓN MOVERSE HACIA ADELANTE Y HACIA ATRÁS PARA AJUSTAR LAS RUEDAS CALIBRADORAS (Vea Fig. 11) (Vea Fig. 13) Las ruedas calibradoras están bien ajustadas cuando se en- La dirección y la velocidad de movimientos están controlados cuentran un poco a distancia del terreno al mismo tiempo que la por los pedales de marcha adelante y atrás.
  • Page 41 OPERACIÓN FUNCIONAMIENTO ATRÁS (ROS) PARA TRANSPORTAR (Vea Fig. 15) Tu tractor está equipado con el Sistema de Funcionamiento Atrás Cuando empuje o arrastre su tractor asegúrese de desenganchar (ROS). Cualquier tentativa del operador de viajar marcha atrás la transmisión poniendo el control de la rueda libre en la posición con el embrague puesto apagará...
  • Page 42 OPERACIÓN ANTES DE HACER ARRANCAR EL MOTOR PARA HACER ARRANCAR EL MOTOR (Vea Fig. 7) Al hacer arrancar el motor por la primera vez o si se ha acabado REVISE EL NIVEL DE ACEITE DEL MOTOR el combustible del motor, se necesitará tiempo para el arranque extra para mover el combustible desde el estanque hasta el motor.
  • Page 43 OPERACIÓN CONSEJOS PARA SEGAR PURGAR LA TRANSMISIÓN • NO use cadenas de llanta cuando la carcasa de la cortadora PRECAUCIÓN: Nunca enganche o desen- de césped esté colocada en el tractor. ganche la palanca del control de rue da libre •...
  • Page 44: Tabla Del Mantenimiento

    MANTENIMENTO ANTES CADA CADA CADA CADA CADA ALMACEN- PROGRAMA DE MANTENIMIENTO DE CADA TEMP- AMIENTO HORAS HORAS HORAS HORAS ORADA Revisar la operación del freno Revisar la presión de las llantas Verificar la sistemas presencia del operador y sistemas "ROS" Revisar si hay sujetadores sueltos Afilar/cambiar las cuchillas de la segadora Tabla de lubricación...
  • Page 45 MANTENIMENTO TRACTOR PRECAUCIÓN: Usar solamente la hojas de repues- Siempre observe las reglas de seguridad cuando dé mante ni- to aprobada por el fabricante de su cortacésped. mien to. Usar una hoja no aprobada por el fabricante de su cortacésped es peligroso, puede dañar su OPERACIÓN DEL FRENO cortacésped y anular su garantía.
  • Page 46 MANTENIMENTO ENFRIAMIENTO DEL TRANSEJE PARA CAMBIAR EL ACEITE DEL MOTOR (Vea Fig. 19 y 20) Las aletas de enfriamiento y el ventilador de la transmisión tienen que mantenerse limpios para asegurar el enfriamiento adecuado. Determine la gama de la temperatura esperada antes de cam- biar el aceite.
  • Page 47 MANTENIMENTO FILTRO DE ACEITE DEL MOTOR FILTRO DE COMBUSTIBLE (Vea Fig. 21) Cambie el filtro de aceite del motor cada temporada o vez por El filtro de combustible debe cambiarse una vez cada temporada. medio que cambie el aceite, si el tractor se usa más de 100 horas Si el filtro de combustible se tapona, obstruyendo el flujo del en un año.
  • Page 48: Servicio Y Ajustes

    SERVICIO Y AJUSTES ADVERTENCIA: PARA EVITAR LESIÓNES SERIAS, ANTES DE DAR CUALQUIER SERVICIO O DE HACER AJUSTES: • Presione el pedal de freno completamente y aplique el freno de estacionamiento. • Ponga el embrague del accesorio en la posición desenganchado (DISENGAGED). •...
  • Page 49 SERVICIO Y AJUSTES • CONECTE LA CONEXION ANTERIOR (E) - Trabajo del dejó • FIJE LOS BRAZOS DE SUSPENSIÓN LATERALES DE LA el lado de tractor. Meta el fin de la barra de la asamblea de CORTADORA (A) AL CHASIS - Ubique el orificio del brazo la conexión por orificio anterior en el tractor suporte anterior encima de la clavija (B) que hay en la parte exterior del chasis de suspensión (F).
  • Page 50 SERVICIO Y AJUSTES PARA NIVELAR LA SEGADORA AJUSTE DE DELANTE A ATRÁS (Vea Fig. 31 y 32) Asegúrese de que los neumáticos estén inflados a la PSI que se IMPORTANTE: El piso debe quedar bien nivelado de lado a lado. indica en estos.
  • Page 51 SERVICIO Y AJUSTES PARA CAMBIAR LA CORREA DE LA CUCHILLA 2. Desconecte el arnés del cable del embrague (A). DE LA SEGADORA (Vea Fig. 33) 3. Quite la pieza de unión anti-rotación (B) que está del lado derecho del tractor. REMOCIÓN DE LA CORREA 4.
  • Page 52 SERVICIO Y AJUSTES PARA HACER ARRANCAR EL MOTOR CON UNA CONTROLAR Y AJUSTAR EL FRENO BATERÍA BAJA (Vea Fig. 36) Si el tractor exige más de 1,5 m (cinco (5) pies) para pararse a una velocidad más alta en el cambio más alto en una superficie nivelada de hormigón seco o pavimentada, entonces se debe ADVERTENCIA: Las baterías de ácido- controlar y ajustar el freno.
  • Page 53 SERVICIO Y AJUSTES REEMPLAZAR LA BATERIA (Vea Fig. 37) PARA CAMBIAR EL FUSIBLE Cámbielo por un fusible tipo enchufable de 20 amps, tipo au to- ADVERTENCIA: No haga cortocircuito con los mo triz. El sujetador del fusible está ubicado detrás del tablero. terminales de la batería al permitir que una llave de tuerca o cualquier otro objeto entre PARA REMOVER EL CONJUNTO DEL CAPÓ...
  • Page 54: Almacenamiento

    ALMACENAMIENTO MOTOR Inmediatamente prepare su tractor para el almacenamiento al final de la temporada o si el tractor no se va a usar por 30 días o más. SISTEMA DE COMBUSTIBLE IMPORTANTE: Es important evitar que se forman depositos Advertencia: Nunca almacene el tractor con de goma en partes fundamentales del sistema de combus-tible gasolina en el estanque dentro de un edificio tales como el carburador, el filtro del com bus ti ble, la manguera...
  • Page 55: Identificación De Problemas

    IDENTIFICACIÓN DE PROBLEMAS PROBLEMA CAUSA CORRECCIÓN No arranca Sin combustible. Llene el estanque de combustible. Motor sin la “ESTRANGULACIÓN” (CHOKE) Vea “PARA HACER ARRANCAR EL MOTOR” en la sec- adecuada. ción de operación. Motor ahogado. Espere varios minutos antes detratar de arrancar. Bujía mala.
  • Page 56 IDENTIFICACIÓN DE PROBLEMAS PROBLEMA CAUSA CORRECCIÓN El motor continúa Sistema de control que exige la presencia del Revise el alambrado, los interruptores y la conexiones.Si operador –seguridad fallado. no están correctas, pongase en contacto con un centro funcionando cuando de servicio cualificado. el operador se baja del asiento con el PRECAUCIÓN: NO opere la máquina sino hasta haber...
  • Page 58 SERVICE NOTES AVISO...
  • Page 59 SERVICE NOTES AVISO...
  • Page 60 09.20.17 CL Printed in U.S.A.

This manual is also suitable for:

Lth1842

Table of Contents