Attach Rear Lift Links; Attach Front Link - Husqvarna LOYTH20F42T Operator's Manual

A
5. ATTACH REAR LIFT LINKS (C) - Lift
rear corner of mower and position
slot in link assembly over pin on rear
mower bracket (D) and secure with
washer and retainer spring.
6. Repeat on opposite side of tractor.
7. ATTACH FRONT LINK (E) - Work from
left side of tractor. Insert rod end of link
assembly through front hole in tractor
front suspension bracket (F).
8. Insert end of link (E) into hole in front
mower bracket (H) and secure with
washer and retainer spring (J).
C
B
C
D
B
A
D
21
F
9. Install belt onto engine clutch pulley (M).
IMPORTANT: Check belt for proper rout-
ing in all mower pulley grooves.
10. Raise attachment lift lever to highest
position.
11. If necessary, adjust gauge wheels be-
fore op er at ing mower as shown in the
Operation section of this manual.
M F
E
H
E
J
H
M