Vitamix Professional Series 500 Owner's Manual page 8

to Lock the Lid in Place: Position lid on container with lid flaps midway between the spout and the
handle. Push the lid onto the container until it locks in place. The lid must always be secured when
processing, especially hot liquids that may scald. never operate the blender without checking to
make sure the lid is securely locked in place.
to remove the Lid: Lift up on one lid flap while holding the container securely.
to remove the Lid Plug: Rotate the lid plug counterclockwise from the "locked" to "unlocked" position
and lift out.
automatic overload Protection: Your Vitamix motor is
designed to protect itself from overheating. If the motor
shuts off, follow these instructions:
Turn off the power switch for up to 45 minutes to reset.
Reset time will be extended if high room temperatures
exist. To reduce the reset time, unplug the machine,
remove the container, and blow air into the center
section of the bottom with a hair dryer on the cool setting.
Power Cord: Your machine is equipped with a long power
cord. Store the unused portion neatly underneath.
Bottom View / Cord wrap:
cord securely. They are flexible, and return to position after the
cord is lifted out.
8
PA Rts A n d F e At U R e s
Rotating Blades Can
Cause Severe Injury.
Do not reach into container
while machine is running.
Plastic cord retainers hold the
warning
front
Back