Cd, Fm Radio & Line In; Loading A Cd; Playing A Cd; Programming A Cd - iLive IHB603B User Manual

CD, FM Radio & Line In

Loading a CD

Open the Disc Door by
1.
pressing the Open button.
2. Place a CD into the unit,
label side facing up.
Close the Disc Door.
3.

Playing a CD

1. Follow the instructions
for Loading a CD.
Press the Source button to
2.
switch to CD mode.
Press the Play/Pause button to
3.
begin playing the loaded CD.

Programming a CD

1. Follow the instructions for
Loading a CD and Playing a CD.
Press the Stop button to
2.
stop the CD during play.
Press the Prog button on the remote.
3.
Use the Skip/Search buttons to
4.
enter the desired track number. Press
the Prog button to set the track.
5. Repeat step 3 until the desired number
of CD tracks are programmed.
6. Press the Play/Pause button
on the remote to begin playing
the programmed tracks.
Customer Support: 1-888-999-4215
IHB603-776-01-IB.indd 11

Playing the Radio

Press the Source button to
1.
switch to FM Radio mode.
2. Press the Tune+/- buttons to tune
the radio. Press and hold to search
for the next available station.

Radio Reception

Adjust the position of the antenna
to improve FM radio reception.

Saving a Radio Station as a Preset

1. Follow the instructions for
Playing the Radio.
2. Press the Prog button on the remote.
3. Press the Tune+/- buttons on the
remote to select a preset number.
Up to 10 stations may be preset.
4. Press the Prog button to save the
current station to the selected preset.

Tuning to a Saved Preset Station

1. In FM Radio mode, press the Mem+
button to cycle through saved presets.

Using the Audio Input

Requires a 3.5mm audio
cable (not included)
1. Connect a 3.5mm audio cable to the
Line In and the audio output on an
MP3 player or other audio device.
Press the Source button to
2.
switch to Line In mode.
3. Use the native controls on
the connected MP3 player or
other audio source to play your
audio through the unit.
11
3/6/2013 2:04:00 PM