Bluetooth Setup & Charging; Pairing A Bluetooth Device; Playing Audio Wirelessly; Charging A Device - iLive IHB603B User Manual

Bluetooth Setup & Charging

Pairing a Bluetooth Device

1. Power on the unit by pressing
the Power button.
Press the Source button to
2.
switch to Bluetooth Mode.
The display will show the
flashing letters "bt".
Press and hold the Pair button.
3.
4. "BT"will flash quickly on the display.
When pairing, remain within
3 feet of the unit.
5. Using the native controls on your
Bluetooth device, select the "IHB603"
in your Bluetooth settings to pair.
If your device requests a password,
enter the default password " 0 0 0 0 ".
Refer to the user's manual for your
specific device for instructions on pairing
and connecting Bluetooth devices.
6. When successfully paired, the
pairing indicator will remain solid.
After initial pairing, the unit
will stay paired unless unpaired
manually by the user or erased
due to a reset of the device.
If your device should become unpaired,
follow the above steps again.
If any pairing issues should occur, un-
pair the unit on your Bluetooth device
and follow the above steps again.
10
IHB603-776-01-IB.indd 10

Playing Audio Wirelessly

1. Follow the instructions for
Pairing a Bluetooth Device.
2. Use the native controls on
the connected Bluetooth
Device to select a track.
3. To play, pause or skip the selected
track, use the native controls
on the connected Bluetooth
Device or press the Play/Pause
or Skip/Search buttons.
4. Audio played through the connected
Bluetooth device will now be
heard through the speakers.

Charging a Device

1. Make sure the unit is
plugged into the wall.
2. Using the appropriate USB charging
cable (not included), connect one
end to the device and the other
to the Charger on the unit.
Refer to the user's manual for your
specific device for manufacturers
required charging amperage as well
as determining the appropriate cable
for your device before charging.
Note: This device uses a USB charging
port with a 500mA maximum
charging capacity, making it
unsuitable for charging iPads.
3. The device will now charge.
3/6/2013 2:04:00 PM