Radio and 3.5mm Audio Input
Tuning the FM Radio
Press the POWER/SOURCE button to
1.
switch to FM mode.
Press the TUN/HR/MIN ± buttons to
2.
tune the FM radio.
Adjust the FM ANTENNA to improve FM
radio reception.
Saving an FM Station as a Preset
1.
Follow the instructions for Tuning the
FM Radio.
2.
After you have tuned to the desired
station, press and hold the MEM
button to begin saving the current
station as a preset.
Press the TUN/HR/MIN ± buttons to
3.
adjust the preset channel.
Press the MEM button to save the
4.
current radio station to the selected
preset channel.
Using Preset Stations
1.
Follow the instructions for Saving an
FM Station as a Preset.
Press the MEM button and use the
2.
TUN± buttons to cycle through saved
radio stations.
Customer Support: 1-888-999-4215
Using the 3.5mm Audio Input
Requires a 3.5mm audio cable (not
included)
1.
Connect a 3.5mm audio cable to the
3.5MM AUDIO INPUT on the clock
radio and an audio output on an MP3
player or other audio source.
Press the POWER/SOURCE button to
2.
switch to Line In mode.
3.
Use the native controls on the
connected MP3 player or other audio
source to play and control audio
played through the clock radio.
Meijer.com
11