Cd & Radio; Loading And Playing A Cd; Programming A Cd; Playing The Am/Fm Radio - iLive IHB248 User Manual

CD & Radio

Loading and Playing a CD

1. Press Open/Close on the CD door and place a CD in the tray, label side facing out, then close the CD tray.
2. Set the Source to CD mode.
3. Use the controls on the unit or the remote to begin playing the loaded disc.

Programming a CD

1. Press the Stop button to stop a loaded CD.
2. Press the Prog button on the remote ("P01" will blink on the display).
3. Press the Skip Back/Fwd buttons to select a track.
4. Press the Prog button to add the selected track to the program. Repeat this process to program up to 20 tracks
to play in a specified order.
5. Press the Play button to begin the program. Press the Skip buttons to advance or reverse through the program.
6. Press the Stop button at any time to cancel the program.

Playing the AM/FM Radio

This unit features an internal AM antenna and a pigtail FM antenna. To improve radio reception, adjust the position of
the unit.
1. Set the Source to AM or FM mode.
2. Use the Skip/Tune buttons to manually tune to a desired radio frequency.

Automatically Programming Radio Station Presets

1. In AM or FM mode, press and hold the Play/Scan button on the unit or the remote. The unit will scan for radio
stations and automatically save up to 20 memory presets (P01-P20).
2. Press the Mem −/+ button to cycle through your memory presets.

Programming Radio Station Presets Manually

1. Use the Skip/Tune buttons to manually tune to a desired radio frequency.
2. Press Prog/Mem on the remote.
3. Use M −/+ to select a memory preset (P01-P20).
4. Press Prog/Mem to confirm and save the station.
10