Table of Contents
Advertisement
Use the Join Me Connection Suite to Synchronise your
Phone
The Join Me installation file (JoinMe_PCclient.exe) can be found
on the SD memory card (in the root folder) on your phone.
1.Connect phone to the PC using the supplied USB data lead.
2."USB debugging" is required to install and use Join Me on your
PC.
A notification will appear in the notification bar on your phone
(very top of screen), when you connect your phone. Press the
notification message to enable USB debugging
(Settings>Applications>Development>USB
Note: It is recommended that USB debugging is disabled when
you are not using Join Me.
3.USB connected screen will be displayed on your handset. The
Join Me client software is preloaded on your SD memory card.
4.Press the "Turn on USB storage" button to access SD memory
from your computer
debugging).
Advertisement
Table of Contents
