Pantech Verizon Jest 2 User Manual page 53

2. Enter the four-digit lock code and press the
3. Press 1. Edit Codes.
4. Select one of the following settings, then press the
• Phone Only: Allows you to edit the lock code for Security. (The default lock code is the
last 4 digits of your phone number.)
• Calls & Services: Allows you to edit the lock code for Restrictions. (The default lock code
is the last 4 digits of your phone number.)
5. If Phone Only is selected, enter the new four-digit code in the
Code field. Enter the new four-digit code again in the
field to confirm your input, then press the
6. If Calls & Services is selected, enter the current lock code in the
Current Code field. Enter the new four-digit code in the
field. Enter the new four-digit code again in the
then press the Key [SET].
RESTRICTIONS
Use the following procedure to configure Location Setting, Calls and Messages
restrictions.
1. Slide the phone up, press the
9. Settings & Tools, 7. Phone
2. Enter the four-digit lock code and press the
2. Restrictions.
3. Press
4. Enter the four-digit lock code and press the
5. Select one of the following settings:
• Location Setting: Unlock Setting/Lock Setting.
• Calls: Incoming Calls/Outgoing Calls.
For Incoming Calls, set Allow All,
Allow All,
For Outgoing Calls, set
• Messages: Incoming Messages/Outgoing Messages.
For Incoming Messages, set Allow All
Allow All
For Outgoing Messages, set
102
Key.
Key.
Enter New
Re-enter New Code
Key [SET].
Enter
Enter New Code
Re-enter New Code
Key [MENU], then press
Settings, 8. Phone Security.
Key.
Key again.
Contacts Only or Block All.
Contacts Only Block All.
or
or Block All.
Block All.
or
6. Press the
In emergency mode, the settings of
PHONE LOCK SETTING
This setting specifies whether the phone should be locked whenever it is turned on.
Lock Mode prevents the unauthorized use of your phone. Once the phone is locked,
it is in restricted mode until the lock code is entered. You can still make emergency
calls.
1. Slide the phone up, press the
9. Settings &
2. Enter the four-digit lock code and press the
3. Press 3. Phone Lock
field,
4. Select one of the following settings, then press the
• Unlocked: Phone is unlocked.
On Power
•
LOCK PHONE NOW
Lock the phone now.
1. Slide the phone up, press the
9. Settings &
2. Enter the four-digit lock code and press the
3. Press 4. Lock Phone
4. To unlock the phone from idle mode, slide the phone up, then press the
Right Soft Key
the
RESTORE PHONE
To delete all User Data and restore all settings to their initial defaults:
1. Slide the phone up, press the
9. Settings &
2. Enter the four-digit lock code and press the
Key [SET].
Restrictions does not apply.
Key [MENU], then press
Tools, 7. Phone Settings, 8. Phone
Setting.
Up: Phone will lock when it is turned on.
Key [MENU], then press
Tools, 7. Phone Settings, 8. Phone
Now.
[Unlock] and enter the four-digit lock code and press
Key.
Key [MENU], then press
Tools, 7. Phone Settings, 8. Phone
01 01
02 02
03 03
04 04
Security.
05 05
Key.
06 06
Key [SET].
07 07
Security.
Key.
Security.
Key.
102 103