Pantech Verizon Jest 2 User Manual page 51

9. Settings & Tools, 7. Phone
2. Set Directional Keys.
2. Select UP Directional Key, LEFT Directional Key
Key, then press the Right Soft Key
3. Press 1. Reset (UP, LEFT or DOWN)
Yes
4. Select and press the Key.
VOICE COMMANDS SETTINGS
CONFIRM CHOICES
When the phone does not recognize your voice command, it will ask you to repeat
your voice command. If it does not recognize the name or number, it will display a
list of up to three choices and speak each one in turn. You can control how often the
phone asks you to confirm the recognized name or number.
1. Slide the phone up, press the
9. Settings & Tools, 7. Phone
To view information about each option, press the Left Soft Key
2. Press 1. Confirm Choices.
Shortcut: From idle mode, press the Voice Commands Key to access the Voice
Commands menu and press the Right Soft Key
3. Select Automatic, Always Confirm
Key.
SENSITIVITY
The Sensitivity setting allows you to adjust the sensitivity monitoring of voice tones.
If you frequently experience the messages
NOT RECOGNIZED Try again?", adjust the sensitivity toward
you frequently experience false activations (when the phone recognizes a name you
didn't say), adjust the sensitivity toward
1. Slide the phone up, press the
98
Settings, 2. Set Shortcuts,
or DOWN Directional
[Options].
Key or 2. Reset Directional Keys.
Key [MENU], then press
Settings, 3.Voice Commands Settings.
[Info].
[Settings].
or Never Confirm, then press the
"Please try again" or
"COMMAND
Less Sensitive. If
More Sensitive.
Key [MENU], then press
9. Settings & Tools, 7. Phone Settings,
2. Press 2. Sensitivity.
More Sensitive, Automatic
3. Select or
Key.
ADAPT VOICE
Voice Commands are speaker independent, which means that no training or
adaptation is required. Some users with heavy accents or unusual voice characteristics
may find difficulty in achieving high accuracy with speaker independent Voice
Commands, so the Adapt Voice feature allows users to dramatically improve the
recognition accuracy after adapting their voices. Users who get acceptable recognition
accuracy will find no additional benefit to performing the Adapt Voice feature.
1. Slide the phone up, press the Key [MENU], then press
9. Settings & Tools, 7. Phone Settings,
2. Press 3. Adapt Voice.
3. Select 1. Train Voice then press the
• Train Voice: Requires that you make recordings of your voice to customize the voice
recognition system. It will take a few minutes.
"Adaptation will take a couple of minutes to complete. Adapt in a quiet
4.
room. Press OK to begin." will appear on the screen. Press the
for the beep, and then repeat the sentences using a normal tone of voice.
5. When you are finished with a full session, you will reach a screen that reads
"Adaptation Complete".
PROMPTS
Allows you to select voice command system characteristics.
1. Slide the phone up, press the Key [MENU], then press
9. Settings & Tools, 7. Phone Settings,
2. Press 4. Prompts.
3. Select 1. Mode, 2. Audio Playback
3.Voice Commands Settings.
Less Sensitive, then press the
3.Voice Commands Settings.
Key.
Key. Wait
3.Voice Commands Settings.
or 3. Timeout, then press the Key.
01 01
02 02
03 03
04 04
05 05
06 06
07 07
99 98